In this lesson I’ll add some useful links that you might want to remember when you take the CCIE R&S exam. All navigation starts from:
Ethertype Values
Some lab tasks might ask you to filter ARP, CDP, STP and such using ethertypes. You might remember most of them after awhile but if you want to look them up, some of them can be found in the wireless section:
- Products
- Wireless
- Access Point
- Cisco Aironet 350 Series
- Configuration Guides
- Cisco IOS Software Configuration Guide for Cisco Aironet Access Points, Cisco IOS Release 12.3(8)JA
And then select “Protocol Filters” to get to the list. Here’s the direct link if you want to see it.
They can also be found in the Bridging and IBM Networking Command Reference but i’m still figuring out how to get there without using the direct link.
Port and Protocol Numbers
If you don’t know a certain port or protocol number then you can find a useful list in the ASA section. Here’s how to get to it:
- Products
- Security
- Firewalls
- Adaptive Security Appliances (ASA)
- Cisco ASA 5500 Series Next Generation Firewalls
- Configuration Guides
- Cisco Security Appliance Command Line Configuration Guide, Version 8.0
- Reference
- Addresses, Protocols and Ports
Here you will find TCP/UDP port numbers but also protocol numbers and ICMP numbers.
Regular Expressions
You should be familiar with regular expressions and how to use them for BGP, but just in case you can find them here:
- Products
- Cisco IOS and NX-OS Software
- Cisco IOS
- Cisco IOS Software Release 12.4 Family
- Cisco IOS Software Releases 12.4 Mainline
- Configuration Guides
- Cisco IOS Terminal Services Configuration Guide, Release 12.4
- Appendixes
- Regular Expressions
Here’s the direct link if you want to take a look.
If I find anything else that is interesting I’ll add it here. If you have something to share please leave a comment in our forum!
No comments:
Post a Comment